AmPro Yamaha 2013 YZ450F GNCC Race Bike $6,300

[Jeff Holland Jr]

Up for sale is my low hour and super clean not clapped out AmPro Yamaha Factory Offroad Team 2013 YZ450F GNCC Race Bike. This is one of Paul Whibley's GNCC Race Bikes for the 2013 season. Paul was the 2012 GNCC champion so this bike carried the #1 number plate for 3 rounds of GNCC racing. I have the title from Ampro Yamaha and bill of sale from Paul as well as a few autographed photos of Paul racing the bike and the owners manual that all goes with the bike. I bought the bike from a GNCC course Marshall (older masters rider) that bought the bike from the AmPro Yamaha team at the end of the 2012 season. He had it for two years and put a few hours on it but it pretty much sat in his garage with a collection of other bikes. I've put around 20 hours on it since. It has been meticulously maintained and spends most time covered in my shop. Below is a list of mods to the bike, a few things I added or changed for my preference.

-Full FMF 4.1 Titanium Exhaust with spark arrestor insert.
-Unibiker Radiator braces/cages.
-Ride Engineering 20mm Offset Triple Clamps
-Ride Engineering rubber mounted handlebar mounts. With +10mm taller handlebar mount posts and spacers set at 6mm forward.
-Pro Taper Bars and Cross Bar Pad
-Renthal Teflon Sticky grips
-ASV F3 Shorty folding clutch & brake levers with dust covers.
-Vortex Ignition
-G2 Throttle Tube
-G2 On-the-fly fork bleeder with handlebar mount bleeded valve.
-Cycra Barkbusters with custom welded Triple clamp mounts
-New GYTR brake cables front and rear. Fresh brake fluid.
-EBC Oversized front brake rotor kit.
-Works Connection front master cylinder cap.
-Radiator Lowering Kit
-Engine Relo Kit.
-Recluse Auto Clutch, hub, basket, plates and fibers. With operational clutch lever.
-CV4 Radiator Hose Kit.
-Evans Coolant
-Flo Racing Foot Pegs and Mud guards.
-Warp9 rear brake pedal
-GYTR Rear brake linkage.
-Warp9 Shift Lever
-Light Speed carbon fiber skid plate
-GYTR X-Ring chain
-Talon 49T rear and 13T front sprockets
-TMD Factory Edition chain slide, guide, and rollers.
-BRAKING rear rotor
-TMD rear brake rotor guard
-TMD rear brake caliper guard
-Cycra Power Flow Radiator Shrouds and Front fender.
- Twin Air Filters
-GYTR Rear axle blocks
-Works Connection rear brake master cylinder guard and cylinder cap
-Works Connection Oil filter cap and reusable SS oil filter.
-Boyeson Power Flo Water Pump.
-Acerbis Oversized 2.3 Gallon Gas Tank
-MotoSeat gripper seat cover with bump.
-Tublis system front and rear
-Michelin Starcross 5 Soft tires.
-Galfer Sintered Heavy Duty break pads
-Heavy Duty Excel A60 wheels and spokes
-Talon billet wheel hubs
-Factory Connection Suspension setup for 210 lb. Vet A Harescramble rider.
-Titanium bolts holding down: rear sprocket, front and rear brake rotors, front axle pinch bolts, subframe, seat.
-Internal oil tank removed by Ampro Yamaha team to avoid oil starvation. Bike now holds 52 Oz. With oil change.

2 hours on the following: full suspension service with seals and shock bearings by Factory Connection Leesburg Fl, Michelin tires, Tublis system, chain and sprockets, Boyeson water pump, brake pads, new FMF muffler, GYTR front and rear brake cables and fluid, new CV4 Hose Kit and Evans Coolant,

Here's a short walk-around video with a cold start and short ride up and down the street going through the gears.

Jeff 321-914-2655 call or text.

 

[Jeff Holland Jr]

Decided to part it out so let me know if your interested in parts.