Fox Float suspension

[Dalton Ellis]

Just curious as to what pressures everybody runs for hare scramble and/or MX. I am looking for a better starting point because I am unsure of where I should begin. Roughly 200lbs fully geared. Gen 2 floats with Evol chamber and LSR standard length A-Arms

 

[Vitor Vasconcelos]

Been a while since i rode the quad, but iirc 155-70 is what i run.

 

[Paul ladouceur]

I ran mine at 190 and 52. But since I have sold the quad I believe Nate is running a stiffer setup because he weights more than I do.
The low pressure is you ride height. I found the shocks to work best let all your Low pressure air out put in your high pressure and then add low pressure. did this for years and they worked great.

 

[mike hubbard]

Go to the Fox website and search a little. They used to have a section with a chart for different quads and starting points. Derisi website used to have some useful set up info as well.
Here ya go. Click on the manual that corresponds to your shock type.

http://www.ridefox.com/help.php?m=powersports&t=manuals&ref=lnav_help

 

[Wayne Mossbrooks]

When I had them on my LTR I had long travel walsh setup and ran 200-220/ 60
remember the small number is mostly for ride height.

but Im 220lbs the chart on fox's site is way low in my opinion

 

[Dalton Ellis]

Thank you all. If I get my Floats back this week I'll play with it a little bit. See you this weekend.